Black Mazda BT-50 Diff Breather Kit
This kit will extend the breathers on the front and rear differentials.
Raising the height of the filtered vents helps to prevent the ingress of water to the differential housings.
$115.00 AUD
In stock (can be backordered)
Product Description
DOUBLE Breather Extension Kit for use on 4wd vehicles.
Raising the height of the filtered vents helps to prevent the ingress of water to the differential housings and gearboxes during water crossings.
Two Ports to extend breathers on front and rear differentials.
This kit is universal and suitable for most four-wheel drive vehicles. Vehicles without threaded housings may require a 6mm rubber hose and clamps and a small amount of ingenuity to install.
It has all items necessary for Toyota and Nissan vehicles and other 4WDs which have 1/8” BSP threaded differential housings.
In most cases, the factory fittings on the differential housings unscrew and are replaced by the 6mm Push fit fittings in the kit.
We recommend you have your favourite 4WD Shop install your DOUBLE breather kit next time they are working on your vehicle!
If you are a DIY person, then you will find this kit is very easy to install.
The fittings are supplied with thread sealant already applied.
The manifold with the filters is easily secured to the firewall or anywhere under the bonnet with the included M6 Stainless Screw (and lock nut if required).
1 x Black Manifold
2 x Stainless Filters
4 x 6mm x 1/8” BSP Push Fit Fittings
2 x BT-50 Fitting Adapter
10 x Cable Ties
1 x M6 x 40 SS SHC screw
1 x M6 Nyloc Nut
8 metres of 6mm LDPE Tube
Additional Information
| Weight | .5 kg |
|---|---|
| Dimensions | 27 × 26 × 7 cm |
