QUAD Breather Extension Kit for use on 4wd vehicles.
*If we have no MATT BLACK in stock we will substitute GLOSS BLACK.
6MM ID Rubber Hose.
12 x Metres of HIGH TEMPERATURE RUBBER HOSE! Much more resistant to HEAT and Friction Wear than the standard LDPE.
8 x Brass Hose Barbs.
8 x Spring Steel Clips
Raising the height of the filtered vents helps to prevent the ingress of water to the differential housings and gearboxes during water crossings.
Four Ports to extend breathers on front and rear differentials, gearbox and transfer case.
This kit is universal and suitable for most four wheel drive vehicles.
It has all items necessary for Toyota and Nissan vehicles and other 4WD’s which have 1/8”bsp threaded differential housings.
In most cases the factory fittings on the differential housings unscrew and are replaced by the fittings in the kit.
We recommend you have your favourite 4WD Shop install QUAD breather kits for 2 reasons:
- The gearbox and transfer case breathers are usually best accessed on the hoist.
- Locating the breathers on the gearboxes can be difficult and they do not always have threaded ports, so the mechanic may need to get creative.
The manifold with the filters is easily secured to the firewall or anywhere under the bonnet with the included M6 Stainless Screw (and lock nut if required).